AVENO Engine CleanUp

From 1 to 1,000 litres - thanks to high-tech and high-performance facilities, we can offer all AVENO products in the most common container sizes, regardless of the application.

AVENO Engine CleanUp
product title
0002-300006-300
Article number: 0002-300006
AVENO Engine CleanUp is an active ingredient concentrate for all gasoline and diesel engines (with and without catalytic converter) for longer oil cleanliness. It can generally also be used in motorcycles. Dirt and sludge deposits in the engine compartment are dissolved by cleaning-intensive surfactants and effectively removed when draining the used oil. AVENO Engine CleanUp cleans and flushes the entire engine circuit.
Application Note
AVENO Engine CleanUp (300ml) is sufficient for one application with approx. 5 liters of engine oil, regardless of manufacturer and engine size. The contents are added to the warm engine oil before the oil change. The oil level must not fall below the minimum level. For maximum effect, run the engine for up to 10 minutes and then change the oil and filter immediately. AVENO Engine CleanUp has been tried and tested in units with mineral and synthetic oil-based engine oils. Area of application: Suspected black sludge, hydraulic tappet rattling, delayed oil change, for dirty engines or used oils, as a preventative measure at every oil change to prevent engine contamination, also suitable for classic cars
Characteristics
  • Long-lasting effectiveness and cleanliness of the fresh oil
  • Remedy for contaminated engines
  • Protection against compression loss in the piston ring area
  • Leads to improved emission values and increases engine performance
Viscosity
ADDITIV
PROPERTIESDATAUNITEXAMINATION AFTER
Kinematic Viscosity at 40°C5.03MM²/SDIN 51659-2:2017-02
AppearanceYellowVISUELL
Density at 15°C850.1KG/M³DIN EN ISO 12185:1997-11
Flash Point (COC)132°CDIN EN ISO 2592:2018-01
Pour Point-33°CASTM D 7346:2015
Product Data Sheet

Notice
To the best of our knowledge, all information on this product page corresponded to the current findings and developments of Deutsche Ölwerke Lubmin GmbH at the time of creation. Our products are continuously further developed. For this reason, our products, the manufacturing processes and all related information on this product page are subject to change at any time and without notice, unless customer-specific agreements exist. The published data are based on standardized test methods under appropriate laboratory conditions and are to be regarded as general, non-binding guide values.

Proper disposal
After use, this oil belongs in a waste oil collection point! Improper disposal of used oil endangers the environment! Any admixture of foreign substances such as solvents, brake and cooling fluids is prohibited. Non-contaminated and empty packaging can be recycled.