AVENO Antifreeze A11

From 1 to 1,000 litres - thanks to high-tech and high-performance facilities, we can offer all AVENO products in the most common container sizes, regardless of the application.

  1. Aveno
  2. Range
  3. Antifreeze
  4. AVENO Antifreeze A11
AVENO Antifreeze A11
product title
0002-400002-015
Article number: 0002-400002
AVENO Antifreeze A11 is a high-quality, ethylene glycol-based radiator protection agent that has been specially developed for older vehicle models and modern vehicles with conventional cooling systems. It offers effective protection against frost, corrosion and overheating. The product contains a combination of silicates and proven inhibitors that ensure reliable protection for metal components such as aluminum, copper and cast iron. It is compatible with a wide range of vehicles and meets the requirements of many car manufacturers. Note: AVENO Antifreeze A11 should not be mixed with silicate-free coolants or coolants with other chemical base formulations to ensure optimum performance and protection.
Application Note
Dilution: AVENO Antifreeze A11 must be mixed with water before use. Recommended mixing ratios: 1:1 (50% antifreeze, 50% water) for antifreeze protection down to approx. -37 °C. 1:2 (33% antifreeze, 67% water) for antifreeze protection down to approx. -20 °C. Preferably use distilled or deionized water to avoid deposits and extend the service life of the cooling system. Compatibility: Suitable for older vehicles and vehicles with conventional cooling systems, including aluminum and cast iron components. Change intervals: The change intervals should be observed in accordance with the vehicle manufacturer's specifications. The cooling system should be thoroughly flushed before changing.
Characteristics
  • Reliably protects the cooling system against frost down to -37 °C (with 1:1 mixture).
  • Contains proven inhibitors that protect all metal components in the cooling system.
  • Provides a protective film on metal surfaces and prevents corrosion and deposits.
  • Suitable for vehicles with older cooling systems.
  • Meets international standards and requirements.
Viscosity
Recommendation
AFNOR R15-601, ASTM D1384, ASTM D2809, ASTM D3306, ASTM D4340, ASTM D4985, ASTM D6210 Type 1-FF, BS 6580 (GB), Chrysler MS-7170, CUNA NC 956-16 (Italien), Fiat 9.55523, Fiat PARAFLU 11, Ford WSS-M97B51-A1, IVECO 18-1830, JIS K 2234 (Japan), MAN 324 NF, O Norm V 5123 (Österreich), SAE J1034, Suzuki, UNE 25-361 (Spanien), VW TL 774-C (entspricht G11)
PROPERTIESDATAUNITEXAMINATION AFTER
AppearanceYELLOWGREEN VISUELL
Density at 15°C1126KG/M³DIN EN ISO 12185:2024-06
Flash Point (COC)112°CDIN 51758
Freezing Point-37°CASTM D 1177
Boiling Point155°CASTM D 1120
pH-Value at 20°C (50 Vol %)8.4ASTM D 1287
Reserve alkalinity<20ML0,1NHCLASTM D 1121
Water content<5GEW%ASTM D 1123
Product Data Sheet
Download PDFDownload PDF
Request a price

Notice
To the best of our knowledge, all information on this product page corresponded to the current findings and developments of Deutsche Ölwerke Lubmin GmbH at the time of creation. Our products are continuously further developed. For this reason, our products, the manufacturing processes and all related information on this product page are subject to change at any time and without notice, unless customer-specific agreements exist. The published data are based on standardized test methods under appropriate laboratory conditions and are to be regarded as general, non-binding guide values.

Proper disposal
After use, this oil belongs in a waste oil collection point! Improper disposal of used oil endangers the environment! Any admixture of foreign substances such as solvents, brake and cooling fluids is prohibited. Non-contaminated and empty packaging can be recycled.