AVENO Antifreeze A12+

From 1 to 1,000 litres - thanks to high-tech and high-performance facilities, we can offer all AVENO products in the most common container sizes, regardless of the application.

  1. Aveno
  2. Range
  3. Antifreeze
  4. AVENO Antifreeze A12+
AVENO Antifreeze A12+
product title
0002-400000-015
Article number: 0002-400000
AVENO Antifreeze A12+ is a high quality ethylene glycol based engine coolant specially developed to provide reliable frost, corrosion and overheating protection for modern cooling systems. It meets the requirements of many leading car manufacturers and is formulated with a silicate-free technology that ensures long life and efficient protection for sensitive metal surfaces such as aluminum. The product offers improved stability and performance for a wide range of vehicle types and applications. Note: This product should only be used in accordance with the vehicle manufacturer's instructions. Improper use or mixing with incompatible products may affect performance and cause damage.
Application Note
Dilution: AVENO Antifreeze A12+ must be mixed with water before use. Recommended Mixing ratios: 1:1 (50% antifreeze, 50% water) for frost protection down to approx. -37 °C. 1:2 (33% antifreeze, 67% water) for frost protection down to approx. -20 °C. Preferably use distilled or deionized water, to ensure the best performance and a long service life. Compatibility: Suitable for use in cars, trucks and stationary engines with aluminum or cast iron components. Before changing the coolant, the cooling system should be thoroughly flushed. Flushed thoroughly. Change intervals: Observe the change intervals and Comply with the manufacturer's specifications.
Characteristics
  • Protects all metals used in the cooling system.
  • Offers an extended change period due to high chemical stability.
  • Silicate-free technology minimizes deposits and improves environmental compatibility.
  • Effective protection against freezing, overheating and corrosion over a wide temperature range.
  • Meets international specifications and requirements of many leading vehicle manufacturers.
Viscosity
Recommendation
DAF 74002, Deutz DQC CB-14, DTFR 29C110 (MB 325.3), Ford 1336797, Ford 1336807, Ford 1365305, Ford WSS-M97B44-D (ab Modell 1999), Jaguar JLM 209722, Jaguar Land Rover STJLR.651.5003, Land Rover STC50529, MAN 324 SNF, MB 325.3, Mitsubishi 0103044, Mitsubishi 0103045, Mitsubishi MZ311986, Opel/GM 6277 M, Opel/GM B0401065, Porsche, SAE J1034, Toyota 00272-1LLAC, Toyota 08889-00115, Toyota 08889-01005, Toyota 08889-80014, Toyota 08889-80015, VOLVO 9437650, VOLVO 9437651, VOLVO VCS (STD 418-0001), VW G 012 A8F M1, VW G 012 A8F M8, VW G 012 A8F M9, VW TL 774-F (entspricht G12+), VW/Audi TL 774-D (entspricht G12+)
Specification
PROPERTIESDATAUNITEXAMINATION AFTER
AppearancePURPLEVISUELL
Density at 15°C1122KG/M³DIN EN ISO 12185:2024-06
Flash Point (COC)>110°CDIN 51758
Freezing Point-37°CASTM D 1177
Boiling Point187°CASTM D 1120
pH-Value at 20°C (50 Vol %)7.5-8.5ASTM D 1287
Reserve alkalinity>5.5ML0,1NHCLASTM D 1121
Water content<5GEW%ASTM D 1123
Product Data Sheet
Download PDFDownload PDF
Request a price

Notice
To the best of our knowledge, all information on this product page corresponded to the current findings and developments of Deutsche Ölwerke Lubmin GmbH at the time of creation. Our products are continuously further developed. For this reason, our products, the manufacturing processes and all related information on this product page are subject to change at any time and without notice, unless customer-specific agreements exist. The published data are based on standardized test methods under appropriate laboratory conditions and are to be regarded as general, non-binding guide values.

Proper disposal
After use, this oil belongs in a waste oil collection point! Improper disposal of used oil endangers the environment! Any admixture of foreign substances such as solvents, brake and cooling fluids is prohibited. Non-contaminated and empty packaging can be recycled.